Hello,
I am using the https://cdn02.fortin.ca/download/58071/drone-dr-3400-install-guide-58071.pdf as a guide on installing a drone telematics to an Evo-One. Firmware is already flashed to 0.50 but the wires on the wire harness for the Drone i receveid in the mail today are different color that the quide. The wire harness on the new drone has the same location on the red and black wires but now instead of the blue and white wires I have left to right the fallwoing colors: white, yellow, black and red. Do I still need to swap the white and yellow wires on hte connector going into the Evo-One?
Thank you